Minilux Control system for movement control
Minilux Control for movement control Minilux Control combines several functions in one single module. The unit is set via a display. Used for both outdoor and indoor light control.
Control 36-080 The Minilux Control is not only easy to set; it also has two functions to choose between: outdoors and indoors. For both the outdoor and indoor functions, the light will be automatically switched on when the movement or presence sensor detects movement, but ONLY if there is not enough daylight.
With the outdoor function the light will not switch off until the timedelay has expired.
With the indoor function the light will switch off as soon as there is sufficient daylight.
Settings
The preferred values are set via the display and the push buttons on the front. You can select the lux range for the light sensor, switch on/off values, cutout delay and test mode. You can also read the current light level on the display. If you use the factory settings (and have positioned the sensors correctly), the control will work as soon as the power is switched on.
You can switch function from automatic on to manual on by connecting a button. You can also have manual off and on via a button.
Movement-controlled lighting control has the benefit of the light only being switched on when it is required. Daylight meets up to 75% of our needs, and it is therefore a waste of resources not to switch the light off when there is sufficient daylight.
Principles
|
Elegant lighting control at Beirholm
In the new domicile in Kolding intelligent Comlux and Luxstat controllers from Servodan were chosen as the optimal solution. |
